- POGO I
- POGO II
- POGO III
- POGO IV
How It Works
POGO I
Step 1: Position the POGO
The operator should position the Pogo perpendicular to the railcar.
How It Works
POGO I
Step 2: Advance the POGO
Advance the Pogo forward until the Hex-3 bit is fully engaged into the capstan.
How It Works
POGO I
Step 3: Set rotation direction of drive shaft.
Firmly hold both railcar opener’s handles and fully depress throttle, release throttle valve as soon as railcar gate reaches the end of its track
How It Works
POGO I
Step 4: Disengage capstan drive
Roll railcar opener away from railcar to disengage capstan drive adapter from railcar capstan socket.
How It Works
POGO I
Step 5: Open Hopper Gates
Gates open and product comes out of the railcar.
How It Works
POGO II
Step 1: Position the POGO
The operator should position the Pogo perpendicular to the railcar.
How It Works
POGO II
Step 2: Advance the POGO
Push the POGO forward and line up the Hex-3 bit then continue to push forward until bit is fully engaged into the capstan.
How It Works
POGO II
Step 3: Set rotation direction of drive shaft to open or close
Firmly hold both railcar opener’s handles and fully depress throttle, release throttle valve as soon as railcar gate reaches the end of its track. Repeat steps to close.
How It Works
POGO II
Step 4: Disengage capstan drive
Move railcar opener away from railcar to disengage capstan drive adapter from railcar capstan socket.
How It Works
POGO II
Step 5: Open Hopper Gates
Gates open and product comes out of the railcar.
How It Works
POGO III
Step 1: Position the POGO
The operator should position the Pogo perpendicular to the railcar.
How It Works
POGO III
Step 2: Rotate the wheels
For railcars with rolling capstans, move the lever to rotate the wheels 90 degrees.
How It Works
POGO III
Step 3: Advance the POGO
Advance the POGO forward until the Hex-3 bit is fully engaged into the capstan.
How It Works
POGO III
Step 4: Set rotation direction of drive shaft.
Firmly hold both railcar opener’s handles and fully depress throttle, release throttle valve as soon as railcar gate reaches the end of its track
How It Works
POGO III
Step 5: Disengage capstan drive
Roll railcar opener away from railcar to disengage capstan drive adapter from railcar capstan socket.
How It Works
POGO III
Step 6: Open Hopper Gates
Gates open and product comes out of the railcar.
How It Works
POGO IV
Step 1: Position the POGO
The operator should position the Pogo parallel to the railcar.
How It Works
POGO IV
Step 2: Move the drivebit
Use the pneumatic controls to raise, lower, advance and retract the drivebit
How It Works
POGO IV
Step 3: Set rotation direction of drive shaft
Firmly hold both railcar opener’s handles and fully depress throttle, release throttle valve as soon as railcar gate reaches the end of its track
How It Works
POGO IV
Step 4: Open Hopper Gates
Gates open and product comes out of the railcar.
